how can i repair a wirie taht has been broken from alternator to wiring harness on 1990 volvo 240?
If they're identical, yes. Try it and find out.
Worn brushes, bad Regulator, or Likely a bad connection or wiring.
To replace the alternator belts in a Volvo 240 DL, first, disconnect the negative battery terminal for safety. Then, loosen the alternator adjustment bolt and the tensioner to relieve tension on the belts. Remove the old belts and replace them with new ones, ensuring they are properly aligned on the pulleys. Finally, adjust the tension of the new belts and tighten the adjustment bolt before reconnecting the battery.
To replace the alternator on a 1983 Volvo 240 DL, start by disconnecting the negative battery terminal for safety. Remove the drive belt by loosening the tensioner, then take out the electrical connections from the alternator. Unbolt the alternator from its mounting brackets and carefully remove it from the engine bay. Install the new alternator by reversing these steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.
When working on anything electrical, a person should have a diagram. The diagram for the alternator wiring for a 1985 Volvo 240 can be found in its maintenance manual.
at least 50 A
how do adjust timing belt on a volvo 240 DL ?
5x108mm
YES
replace ign sw on 1991 volvo 240
The VR is on the back of the alternator.