Even with a quality replacement product, this is a very tough DIY job, especially for the inexperienced...and a bad result (doesn't work well, not water/air tight, short life, etc) is common. Best to have a upholstry/top shop do it.
Replace the convertible door seal.
Where is the hydraulic reservoir for 1988 Chysler Lebaron convertible top?
There is no definite time that you need to replace a convertible top. If it is properly maintained then it can last for many years.
I have successfully replaced a convertible top on my 95 mustang and published an article on how to do it. See the link below.
remove the screws on the inside fender well, take out the bolt in the top of the louvered panel, pull panel out slide battery out.
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
as hard a dick on viagra
Take it to a professional. This is not a DIY job.
About $ 500.00 for the top and arround $ 200.00 for the head linear + Labor
Changing the top on this (and all of what are the chassis 107 models, regardless of the engine number (280, 250, 380, 560, etc) assigned to that year is a straightforward process, like most all tops. This one is a particularly tricky fit and has some difficult parts to deal with. And it becomes increasingly more difficult with the less expensive replacement you buy. In other words, if you have to ask, you can't do it. The labor, without the replacement top itself is commonly $800-1200.
u will need a new hole top =( srry