0
What dash board lights? The ones for the ac controls? the lights to the dash cluster?Go to a auto parts store get the lights. If they are for the dash cluster you will need to get 10 I believe. you have to completely remove the dash cluster once it is out of the truck all you have to do is turn and pull out the old lights and put the new ones in. If you talking about ac controls there should be a total of 4 same thing once you get the dash apart turn and pull the old ones out and put the new ones in.
Before you do this, make sure that you disconnect the negative cable on your battery and wait about 90 seconds, since you are going to be working around the AIRBAG and could set it off by accident!!!!.
What else can I help you with?
How do you replace the dashboard lights on a 1999 Mazda Millenia?
Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.
How do you replace the dashboard lights for the ventilation controls on a 2005 vw passat?
To replace the dashboard lights for the ventilation controls on a 2005 vw passat you need its user manual.
How do you replace dash lights on a vectra?
remove the dashboard, and u will see the lights behind it
Dashboard lights for Mercedes 300ce not working?
Your brake lights are out too! Replace the fuse.
How do you change the dashboard lights on 2005 crown vic?
you have to remove the cover of the dashboard to replace the light bulbs
How do you replace dashboard lights on 2004 avalanche?
To replace the dashboard lights in a 2004 Chevrolet Avalanche, first, disconnect the negative battery cable for safety. Next, remove the dashboard trim and unscrew the instrument cluster to access the bulbs. Carefully twist out the burnt-out bulbs and replace them with new ones, ensuring they are the correct type. Finally, reassemble the dashboard and reconnect the battery to test the new lights.
How do you replace dashboard lights on a 2000 Kia Sephia?
To replace the dashboard lights on a 2000 Kia Sephia, start by disconnecting the car battery for safety. Remove the dashboard cover by unscrewing the necessary screws and gently prying it off. Locate the burnt-out bulbs in the instrument cluster, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the dashboard, reconnect the battery, and test the new lights.
How do you remove the dashboard to replace dashlights on a 1996 E230 Mercedes?
Adjust steering wheel outward and down to access the dashboard easier. Then with a special removal tool reach behind the side and back. Slowly lift out. The lights are located directly in back of dashboard. Replace them with new lights and return dashboard.
How do you replace the dashboard lights in a 1998 Ford Expedition?
Check engine light is out
How do replace the dashboard lights on a 1999 Mercury Mountaineer?
instrument panel or controls?
How do I replace dashboard lights on Toyota Sienna 2000?
To replace the dashboard lights on a 2000 Toyota Sienna, first, disconnect the negative battery terminal for safety. Remove the dashboard panel by unscrewing any visible screws and gently prying it off to access the instrument cluster. Once exposed, locate the burnt-out bulbs, twist them counterclockwise to remove, and replace them with new bulbs. Reassemble the dashboard and reconnect the battery to test the new lights.
How do you replace dashboard lights on a 2006 Mitsubishi lancer?
To replace the dashboard lights on a 2006 Mitsubishi Lancer, first, disconnect the negative battery terminal to ensure safety. Remove the dashboard panel by unscrewing the necessary screws and gently prying it off. Locate the burned-out bulbs in the instrument cluster, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the dashboard, reconnect the battery, and test the lights to ensure they work properly.
