easy job, use small screwdriver prize from dash side to side, this releases clips fit new switch just connect wires and push in...
The turn indicator relay in an Audi TT is integrated with the hazard switch. To replace the relay you would need to replace the hazard switch.
Inside the hazard switch.
its the hazard switch, its all one unit
It's in the hazard warning switch. You need to replace the switch.
This seems to be a cammon fault with VW/Audi cars. U will need to replace the hazard light switch mechanism which contains the switching contacts. I had to replace same in my last cars (VW/Audi)
To replace the hazard switch in a 2002 Audi A6, first, disconnect the negative battery terminal to ensure safety. Then, carefully remove the trim surrounding the center console, which may involve undoing screws or clips. Once the trim is off, locate the hazard switch and unplug the electrical connector before removing the switch itself. Install the new switch by reversing the steps, ensuring it clicks into place, and reconnect the battery.
in my 2001 A4, it was the hazard light switch that had to be replaced. maybe thaqt's your issue also
The turn and hazard flasher relays are incorporated into hazard switch.
behind the hazard button, its built as complete assembly for Turn/hazard signal
you go.... and replace it!
1999 Audi a6 quattro, How I fix the problem when the turn signals don't blink, but hazard lights work well?
It's built into the hazard light switch. The hazard light button will slide out, with the relay (small box) attached.