Front indicator bulbs - remove the complete headlight unit - see 'related answers' for this.
Rear indicator bulbs - unfasten the rear light unit which is held in by a big plastic wing-nut on the inside. Lift the hatch and reach in behind the light unit. You will feel a hole in the trim and inside it a plastic wing-nut. Unscrew that and the rear light unit will come loose but will still be retained by two plastic pegs, top and bottom, on the outside. Get a firm grip of the light unit with both hands and give a sharp tug to release the plastic pegs. The light unit will now hang on its wiring. Bulb holders are twist-and-turn.
The indicator panel should by carefully pried out. Then you can change the bulb.
How do you replace a front indicator bulb in a Saab 93
To change the rear indicator bulb on a Ford Fiesta, first, open the rear hatch and locate the light assembly. Remove the relevant access panel or screws to detach the light unit from the vehicle. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the light unit by reversing the steps. Finally, test the indicator to ensure it’s functioning properly.
yes
what size of bulb do you need to replace a reverse bulb in a w registration fiesta
what do you do if wingnut stuck when replacing a rear indicator bulb on a vw beetle
Change the faulty bulb.
how can i replace a brakelight bulb on a 2002 nissan frontier?
To replace the indicator bulb on a Volvo S80, start by opening the hood and locating the light assembly. Remove the screws or clips holding the assembly in place, then gently pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Finally, test the indicator to ensure it’s working properly.
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.
To replace the gear indicator bulb on a Lexus RX 330, first, disconnect the negative battery terminal for safety. Then, remove the center console panel by unscrewing any screws and gently prying it away. Locate the bulb socket for the gear indicator, twist it counterclockwise to remove, replace the bulb, and reassemble the console by reversing the steps. Finally, reconnect the battery and test the new bulb.
To replace the rear indicator bulb on a BMW Z4, first, open the trunk and locate the access panel on the side where the bulb needs replacing. Remove the panel by unscrewing or unclipping it, then twist the bulb holder counterclockwise to release it. Replace the old bulb with a new one, ensuring it’s securely fitted, and reassemble the holder and access panel. Finally, test the indicator to confirm it's working properly.