Can only be reset using suitable garage diagnostic equipment as the airbag system on Skoda Fabias is completely computer controlled. Skoda dealers use their manufacturers diagnostic machine which is known as the VAS5051B to reset the lights, yet many universal diagnostic tools are also capable.
It is emission warning light. I know because I just happen to get one today. :(
Coolant system warning light. It should go off when you add coolant.
To reset the tire pressure warning light on a Skoda Fabia, start by ensuring that all tires are properly inflated to the recommended pressure. Then, turn on the ignition without starting the engine. Locate the tire pressure monitoring system (TPMS) reset button, usually found beneath the steering wheel or in the glove compartment, and press it until the warning light blinks and turns off. Finally, turn off the ignition and restart the vehicle to confirm that the light has reset.
on the side of the gear box
Mine, a 2010 1.4 TSI VRS has a button down by the hand brake. Hold it for a couple of seconds
The 40 degrees warning light on a Skoda Fabia typically indicates that the engine or coolant temperature has reached 40 degrees Celsius, signaling that the vehicle is starting to warm up. It's generally not a cause for concern, as this temperature is within normal operating range. However, if the light persists or you notice other warning lights or performance issues, it's advisable to check the coolant levels and engine status. Always refer to the owner's manual for specific guidance related to warning lights.
no
You will find the directions in your car manual.
under the light switch in a little department, behind a little "door"
It usually indicates that the car is due for a service
If you mean that you have a warning light on, then once the problem that is causing the airbag warning light to come on is diagnosed and fixed, the light will reset itself.
You can reset your Chevrolet 2500 pickup truck airbag warning light by removing the airbag warning light fuse. Keep the fuse out for 10 seconds and replace it to its original slot.