take it to the dealer, and they will do it
After which mileage mercedes c300 needs a b1 service?
To reset the A5 service indicator on a 2010 Mercedes-Benz C300, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn off the ignition and then restart the vehicle; the service indicator should be reset. If it doesn't reset, repeat the process to ensure it was done correctly.
What is the cost for 5A servise for c300
To reset the SRS warning light after replacing the driver's seat in a 2008 Mercedes-Benz C300, you typically need to use a diagnostic scanner that can communicate with the car's airbag system. Connect the scanner to the OBD-II port, turn on the ignition, and follow the prompts to clear the SRS codes. If you don’t have a scanner, you can also disconnect the car battery for about 10 minutes, then reconnect it, which sometimes helps reset the system. Always ensure that all connections related to the airbag system are secure before resetting.
To reset the trip odometer in a 2008 Mercedes-Benz C300, press the "Trip" button located on the instrument cluster until the trip odometer you want to reset is displayed. Then, press and hold the same "Trip" button for a few seconds until the reading resets to zero. Make sure to release the button once the reset is complete.
oil capacity 2016merceds c300 4matic
A mercedes C300 costs twenty-thousand dollars. This vehicle is at the top of the mercedes line and is reserved for really rich people. Make sure not to get a counter fit mercedes from China or India.
18 gal
On cover of fuse box
top driver side
8 quarts