To reset the Service C indicator on a 2009 Mercedes CLS550, turn the ignition to the "ON" position without starting the engine. Press the gas pedal all the way down three times within 10 seconds. After the third press, the service indicator should reset. Turn off the ignition and start the engine to confirm the reset was successful.
anybody have any info on a 2009 ml320 how to reset service message?
To reset the service mileage on a 2009 Mercedes-Benz C180, turn the ignition to the “ON” position without starting the engine. Use the steering wheel buttons to navigate to the "Service" menu on the display. Select "Assyst Plus," then choose "Full Service" or "Service A/B," depending on what you need to reset. Confirm the reset when prompted, and your service mileage should be updated.
To reset the service light on a 2009 Mercedes-Benz ML350, turn the ignition to position "2" (do not start the engine). Press the gas pedal three times within 10 seconds. After that, turn the ignition off, then back on to verify that the service light has been reset. If it remains on, repeat the process.
To reset the service indicator on a 2009 Mercedes-Benz ML550, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Next, turn the ignition off, then turn it back to the "ON" position, and the service indicator should be reset. If the indicator persists, repeat the process or consult the vehicle's manual.
take it to the dealer, and they will do it
2009
You don't!
see:- http://grumunkin.blogspot.com/2009/08/how-to-reset-service-indicator-on.html :-)
Go get it serviced.
2009 models can be reset using the centre display panel going to "car-settings" and just scrolling down, it will not alter the long life service, for that you need a scanning tool.
To reset the service indicator on a 2009 Ford Transit, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, the service indicator should reset, and you can turn off the ignition. Restart the vehicle to ensure the indicator has been cleared.
To reset the service light on a 2009 Vauxhall Corsa, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds. Turn off the ignition, then start the engine to check if the service light has reset. If the light remains on, the process may need to be repeated.