To reset the service indicator on a 2009 Mercedes-Benz ML550, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Next, turn the ignition off, then turn it back to the "ON" position, and the service indicator should be reset. If the indicator persists, repeat the process or consult the vehicle's manual.
anybody have any info on a 2009 ml320 how to reset service message?
Go get it serviced.
To reset the service indicator on a 2009 Ford Transit, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, the service indicator should reset, and you can turn off the ignition. Restart the vehicle to ensure the indicator has been cleared.
see:- http://grumunkin.blogspot.com/2009/08/how-to-reset-service-indicator-on.html :-)
To reset the service indicator on a 2009 Sprinter van, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the service indicator has been reset. If necessary, repeat the process to ensure it has been cleared.
To reset the Service C indicator on a 2009 Mercedes CLS550, turn the ignition to the "ON" position without starting the engine. Press the gas pedal all the way down three times within 10 seconds. After the third press, the service indicator should reset. Turn off the ignition and start the engine to confirm the reset was successful.
2009
You don't!
press and hold right button (3) Turn ignition ON 10second countdown Release button at end of 10secs Turn Ignition OFF
Most likely you will have three buttons labeled INFO-SETUP-RESET on the inside of your vehicle. If you press info until you get to the indicator for Oil Life, you should be able to press and hold reset to...reset it. Please refer to your owners manual in future cases
To reset the service mileage on a 2009 Mercedes-Benz C180, turn the ignition to the “ON” position without starting the engine. Use the steering wheel buttons to navigate to the "Service" menu on the display. Select "Assyst Plus," then choose "Full Service" or "Service A/B," depending on what you need to reset. Confirm the reset when prompted, and your service mileage should be updated.
It is a fault detected by the module.