Most likely you will have three buttons labeled INFO-SETUP-RESET on the inside of your vehicle. If you press info until you get to the indicator for Oil Life, you should be able to press and hold reset to...reset it. Please refer to your owners manual in future cases
see:- http://grumunkin.blogspot.com/2009/08/how-to-reset-service-indicator-on.html :-)
Go get it serviced.
anybody have any info on a 2009 ml320 how to reset service message?
To reset the service indicator on a 2009 Ford Transit, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, the service indicator should reset, and you can turn off the ignition. Restart the vehicle to ensure the indicator has been cleared.
To reset the service indicator on a 2009 Mercedes-Benz ML550, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Next, turn the ignition off, then turn it back to the "ON" position, and the service indicator should be reset. If the indicator persists, repeat the process or consult the vehicle's manual.
Turn the ignition on, with the engine off. Press the gas pedal to the floor three times in ten seconds.
You will have to locate the Info button to reset your computer on a 2009 Sprinter after an oil change.
To reset the Service C indicator on a 2009 Mercedes CLS550, turn the ignition to the "ON" position without starting the engine. Press the gas pedal all the way down three times within 10 seconds. After the third press, the service indicator should reset. Turn off the ignition and start the engine to confirm the reset was successful.
You need to access the info button on a 2009 sprinter van to reset the computer.
For 2009 Ford E350 automatic transmission:NOTE: For the next step, do not rotate the key fully to the START position.With transmission in the PARK position, rotate the key to the ON position.Locate the odometer reset button.Press the odometer reset button until the reset menu appears.Press and hold for a few seconds. Then release the button.Rotate the key to the OFF position.Rotate the key to the START position and release.Observe the odometer display.The CHANGE OIL indicator should not be lit at this time.
To reset the computer on a 2009 Sprinter van after an oil change simply check your user manual.
Turn key on, engine, off. Press gas pedal to the floor, 3 times within 10 secs. Start vehicle, and the oil light should be off.