Exactly the same as the 2008.
To reset the service indicator on a 2008 Mercedes S320, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to ensure the service indicator has been reset. If the indicator remains, repeat the process.
To reset the service indicator on a 2008 Polo 9N, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After this, turn the ignition off and then back on to check if the service indicator has been reset. If the indicator remains, repeat the process.
take a hammer to the light
To reset the service indicator on a 2008 Mercedes E320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the service indicator has been reset. If successful, the indicator should no longer be displayed on the dashboard.
To reset the Service Reminder Indicator on a 2008 Volvo V70, first turn the ignition to the "ON" position without starting the engine. Press the trip odometer reset button (located on the dashboard) and hold it down. While holding the button, turn the ignition off and then back to the "ON" position again. Release the button, and the Service Reminder Indicator should be reset.
To switch off the service indicator on a 2008 Renault Clio, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the service indicator begins to flash. Once it starts flashing, release the button, and then press it again until the indicator turns off. This should reset the service light.
To reset the service indicator on a 2008 Mercedes CLK 350, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service indicator has been reset. If the indicator remains, repeat the process.
To reset the service indicator message on a 2008 Mercedes CLK350, first turn the ignition to position "2" (without starting the engine). Then, press the gas pedal three times within 10 seconds. Finally, turn the ignition off and then back on to ensure the service indicator has been reset. If necessary, you can also consult the owner's manual for specific instructions related to your vehicle.
To reset the service indicator on a 2008 Seat Ibiza FR TDI, turn on the ignition without starting the engine. Press the accelerator pedal fully three times, then turn off the ignition. This should reset the service light. If the light remains on, you may need to repeat the process or consult the vehicle's manual for further instructions.
To reset the service indicator on a 2008 Mercedes-Benz CLK, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then start the engine to check if the service indicator has been reset successfully. If needed, repeat the process for confirmation.
Just push in the clock adjuster and start engine hold down for 12 seconds it will clear