With the ignition on hold down the mileage reste button until you get 4 dashes or use the socket under the ash tray to connect the vag reset tool.
CHECK
How to Reset the Service Interval on a Nissan Navara 2.5 Read more: How to Reset the Service Interval on a Nissan Navara 2.5 | eHow.com http://www.ehow.com/how_7479944_reset-interval-nissan-navara-25.html#ixzz0eMmf6XGz
mercedes b180
This could mean that your car is due for service , on the Sharan 1.8t the oil light needs to be reset after service, you find the reset plug to which you connect the device to reset the light under the ash-tray. Or, it coud that the oil pump is mulfunctioning, there is not enough system oil pressure.
with the dealer computer.
To turn off the service interval light on a BMW motorcycle, first, ensure the ignition is off. Then, press and hold the trip reset button while turning the ignition on without starting the engine. Continue holding the button until the display shows the reset option, then release the button and press it again to confirm the reset. The service light should turn off, indicating that the service interval has been reset.
AnswerCars today use an internal clock and the odometer reading stored when the last service interval was reset to count down to the next service interval.
This is a service interval reminder. You can hold down the two buttons on your guage cluster at the same time. to reset each Service "interval reminder".
Service Light Reset - Citroen Xantia (1997 on)Using button located within speedometer dial.Switch the ignition off.Press and hold button.Switch on the ignition.Keep the button depressed.Service Interval and "spanner" symbol will illuminate for five seconds
unfortunately this is not possible without service workshop dignostic software
Dealer
To reset the service interval indicator on a 2002 VW Bora, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to confirm that the service indicator has been reset. If the indicator still shows, repeat the process to ensure it has been properly reset.