how do u reset service light on 2007 plate bravo
If you buy a Fiat, you don't way to visit the concesination hay que joderse.
To reset the oil service light on a Fiat Bravo, turn on the ignition without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, turn off the ignition and then start the engine to ensure the oil service light has been reset. If the light remains on, repeat the process.
Airbag light can only be reset using diagnostic equipment.
Only a FIAT dealer can do this.
User manual (and my local FIAT garage) say this can only be done by a FIAT dealer
According to the doblo operating guide you have to take it to a fiat dealer to switch off the service light. I also asked my mechanic and he confirms this.
It is important to know what the warning lights on a car means. The Service light can be reset by fixing the problem within the car, or replacing its fuse.
To reset the service light on a Fiat Ducato C, first turn on the ignition without starting the engine. Press the accelerator pedal three times within 10 seconds. After that, turn off the ignition and then start the engine; the service light should be reset. If the light remains on, you may need to consult the vehicle's manual or visit a service center.
according to autodata service lamp can only be reset using suitable diagnostic computer Dr.Pedro VolksWagen service technician
To reset the service light on a 2004 Fiat Panda, you will typically need to access the vehicle's diagnostics system using an OBD-II scanner. Once connected, navigate to the service reset option within the scanner's menu and follow the prompts to reset the service light. It is important to ensure that any underlying maintenance issues have been addressed before resetting the service light to prevent potential damage to the vehicle. If you are unfamiliar with using an OBD-II scanner, it may be best to consult a professional mechanic for assistance.
To reset the service reminder on a Fiat Grande Punto, turn on the ignition without starting the engine. Press the accelerator pedal three times within ten seconds. After doing this, turn the ignition off and then back on to ensure the service light has been reset. If the light remains on, you may need to repeat the process or consult the vehicle's manual for additional instructions.
The engine light is reset by disconnecting both cables from the battery (Negative first) for 5 minutes. When you reconnect the battery (positive first) Start the car, the computer is now reset and the light is off. If the engine light comes back on, take it to a mechanic in order to find out the trouble codes. Good luck