Resetting FSS
1 Turn key to position 2 (before Start)
2 Within 4 seconds press button 1 twice (left of speedo)
3 The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0 ( position where key can be removed).
4 Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1.
After 10 seconds a signal sounds, and the display shows 15,000 km or 10,000 miles for 10 seconds.
5 Release button 1.
To reset the service light on a 2002 Mercedes CLK 320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off and then back on to verify that the service light has been reset. If it remains lit, repeat the process.
You would have to have service B performed by a authorized Mercedes Benz technician. There is a special laptop they hook up to the cars after these services are performed in order to get rid of that message on your dash. On the CLK 320 Cabrolet you have to perform a series of actions on your dash i.e. reset button etc. to reset the service reminder. There is no plug in for a Mercedes techniciam to reset the reminder.
To reset the service D message on a 2004 Mercedes E-320, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to check if the service light has reset. If it hasn’t, repeat the steps.
how to reset remote key fob for Mercedes SL 320
I did the oil change on my 2000 ml 320 but the dash still displaying -10 D and i have tried to do the reset following the procedurs but the two little wrenches are there and
i do not know how to put gas in the car, E-320 Mercedes Benz, 2002
To reset the service indicator on a 1999 Mercedes-Benz CLK 320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine. The service indicator should now be reset.
320 CDI
To reset the radio code on a 2002 Mercedes SLK 320, you typically need to turn on the ignition without starting the engine, then turn on the radio. If the radio displays "CODE," you can enter the code using the radio buttons. If you don't have the code, you may need to refer to the owner's manual or contact a Mercedes dealership for assistance, as they can provide the necessary code based on your vehicle's VIN.
I need to replace the odometer light on 1998 Mercedes ML 320.
Trade the car in for a Nissan.