0
The engine management light is on for a reason. The car needs to have a diagnostics run on it and the fault corrected. Usually it will then reset itself and the fault will be recorded in the ECU memory. The codes can also be erased with the same diagnostics equipment but if the fault is not cured the light will come back on. Renault will usually put the car on there diagnostics for 1/2 on hours labour. You can then decide if you want them to repair it or find someone cheaper. Most local garages have diagnostics these days but not all can read the Renault codes.
What else can I help you with?
How do you reset the service light on Renault clio 2?
Put some oil in the engine. This warning light means your oil level is low.
How do you Reset seat belt warning light Renault Clio?
You put your seatbelt on.
Why is the stop light on in a Renault master?
How can I reset engine light on renault master van 2012 125bhp
How do you reset the engine warning light on a Nissan primera p12?
The best way to reset the engine warning light on a Nissan Primera p12 would be to take it to a mechanic. It is best to have a mechanic check it out to make sure nothing is wrong that could malfunction and put someone in danger. The mechanic will be able to reset the engine warning light.
How do you reset the service light on a renault laguna?
After a repair has been made on a Renault Laguna the service light will need to be reset. To do this plug the diagnostic tool into the computer and reset the light.
How to Reset oilchange warning on Renault scenic 2?
Tickel it and smile!
How do you reset the check engine light in a 2003 Honda Civic EX sedan?
Try to reset any engine warning lights after the situtation if resolved by disconnecting the positive post of the battery for at least 30 minutes. This gets the computer time to possibily reset and eliminate the warning light.
How do you reset warning lamps on GMC?
What warning light? The only warning lights that can be reset are the Maintenance Required and Check Engine Light. The Maintenance Required light is reset in different ways depending on model and year. The procedure is listed in your owner's manual. Reset the light after performing scheduled maintenance listed in your owner's manual, usually oil/filter change. The Check Engine light is reset by repairing the problem then unhooking the battery for 15 minutes, on a pre-1996 vehicle. On a 1996 and later vehicle it normally requires you use an OBD2 scan tool to reset the light. If you do not repair the problem that set the fault code, the light will just come back on. Your oil pressure warning light means you have low oil pressure, temp warning light means the engine is over heating, alternator light means the charging system has a problem.
How can the airbag light be reset on a Renault megane?
In order to reset the airbag light on a Renault Megane, you will need to take your vehicle into an auto body shop. You cannot reset it yourself.
How do you reset service light on Renault megane 2003?
To reset the service light on a 2003 Renault Megane, turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard until the service light begins to flash, then release the button. After a few seconds, the light should turn off. If it doesn't, repeat the process to ensure the reset was successful.
How do you reset service engine light on 2002 Avalanche?
It is important to pay attention to the warning lights on a car. To reset a service engine light on a car, a person must fix the problem causing the light to go off.
What do the warning light on a Hyundai coupe y reg mean?
When there is a component on the engine that is malfunctioning the warning light will turn on. The code should be assessed for what needs to be replaced so the light can the be reset.
