To reset the airbag light on a Peugeot 206, you typically need to use a diagnostic tool or OBD-II scanner to access the vehicle's computer system. Connect the scanner to the OBD-II port, read any error codes, and clear them. If you don't have a scanner, disconnecting the car battery for about 10-15 minutes may also reset the airbag light, but be cautious as this can reset other settings in the vehicle. Always ensure that any underlying issues triggering the light are addressed before resetting.
Dashboard warnings on your Peugeot 206 depend on the car's problem. It could be an indicator light for ABS, airbag, engine light or something else.
Have the air bag system repaired and the light will reset itself.
No, as far as I can see it does not.
I have the same year one, and mine has NO indication that there is any airbags, does yours??
computer's code
lick my shaft
remove the centre console and its under there, around the handbrake
There is a fault, get it to you nearest Peugeot dealership without delay...I mean like yesterday, the SRS (Airbag) could save your life, you need to confirm that it's working correctly, before it's too late...god forbid
What about it? If you want to know where it is, remove the centre console from around the handbrake and its under there.
To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.
reconnect the plug under driver seat. it helps.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.