To reset the emission fault light in a 2008 Volvo V70, you can use an OBD-II scanner to clear the diagnostic trouble codes (DTCs) that triggered the light. Simply plug the scanner into the OBD-II port, read the codes, and follow the prompts to erase them. Alternatively, you can disconnect the battery for a few minutes, which may also reset the light. However, it's essential to address any underlying issues that caused the light to come on to prevent it from returning.
Try to disconnect the battery for a few minutes.
hi, disconnect the battery for 5 minutes.
how do you reset engine light on 1991 volvo 240
In order to get your SRS Service Airbag light reset, You have to go to the Volvo dealership.
how do you reset the alarm system service light on a 2001 volvo s80
Reset the exhaust emission warning light by turning the ignition on and off 40 times. Light codes can be read by the old brake/accelerator press and turn the ignition on.
To reset the airbag warning light on a Volvo V40, you must take the vehicle to the dealer. The dealer will check the airbags and turn off the light using a specific tool.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
Dealer or certified Volvo shop only.
The ABS light is on because there is a fault in the system. Once the fault is repaired or fixed the light will reset itself. The ABS system can be scanned for codes to help diagnose the problem.
You can't reset the parking light - It shows you have a fault at that time - Cure the fault and the light will go out - I have a problem with mine - I have an intermittent fault the light only comes on when the parking brake is faulty - most of the time the lights out
To reset the SRS airbag light on a Volvo S60, you typically need to use an OBD-II scanner that can read and clear airbag codes. First, connect the scanner to the vehicle's OBD-II port, usually located under the dashboard. After retrieving any fault codes and addressing any underlying issues, you can clear the codes to reset the airbag light. If you don't have access to a scanner, it's best to consult a professional mechanic or a Volvo dealership for assistance.