It is so easy. Just follow this procedure
Turn the ignition to the ON position -Press the selector button so that the warning is showing -Press and Hold the selector for 10 seconds, the display will flash. Once flashing let go of the button -Press and hold the selector button for 5 seconds, the display will reset.
I just tried the same procedure on my 2007 Honda Accord and it worked.
how do i get a code for my 2007 honda odyssey 2007 if i have the serial for the radio
To reset the wrench light on a Honda Odyssey after an oil change, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition. When you start the vehicle again, the wrench light should be reset.
There is no fuel shutoff on a Honda.
get your brakes fixed....
disconect battery for 15 seconds
There is a 5 digit code in the glove box.
Honda's maintenance minder says to, "refer to Civic Sedan's owner's manual."
To reset the oil life percentage on a Honda Fit after an oil change, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to confirm that the oil life indicator has reset to 100%.
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
To reset the code in a 2006 Honda Odyssey after changing the battery, you typically need to enter the radio or anti-theft code. First, turn on the ignition without starting the engine. Then, if the radio displays "Code," enter the correct code using the preset buttons. If you don't have the code, you can find it in the owner’s manual or by contacting a Honda dealer with your vehicle's VIN.
The fuel reset button on a 2011 Honda Odyssey is located in the driver's side footwell, near the door. It is typically found to the left of the brake pedal, near the fuse box. The button is red and labeled "Reset" or "Fuel Pump Reset." Pressing it can help reset the fuel pump after a collision or if the vehicle has run out of gas.
The code A123, in your 2008 Honda Odyssey, is a reference that the air filter may need to be changed. A code should reset after changing the air filter.