0
Turn ingnition key to position 2(do not start). Go to where it says milage. Press up twice on steering wheel till it displays the service. Press and hold the reset button on the right side of the instrumnet cluster till it displays release and hold another 3 seconds. release and your done. It is a combination of button presses using the time and odometer reset buttons. I need to do my own but don't know the sequence. There is a publication with them in, which most decent service stations/garages should have. This process is for a 2001 and newer. (w203) This is the process for the older ones The car Key must put into the second Position. (Not starting Position, but all Lights on) Then you must double push the little "0" Button. (You have only 2 Seconds to do it)
Then take the Key in Position 0.
Then Push the little "0" Button and hold him.
Then again take the Key on Position 2 with holded "0"-Button.
After ca. 10 seconds, it makes a Beep and the Service Meter is resetet.
What else can I help you with?
How do you Reset service indicator on 2000 ml320?
To reset the service indicator on a 2000 Mercedes-Benz ML320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, turn the ignition off and then back on to verify that the service indicator has been reset. If the indicator still shows, repeat the process.
How do you reset service indicator message for 2000 Mercedes Bens E240 after b is complete?
Most likely the same as the 2000 E430 which is as follows: turn key to position 1 press up or down arrow til service indicator appears press and hold (R) button for approx 2 seconds display will show "do you want to reset service interval?" press (R) button again to reset Hope that works for you.
Reset oil indicator 2000 BMW 323i?
The reset oil indicator on a 2000 BMW 323i warns the driver that it is time to service the engine. It is automatically set to trigger every 3,000 miles and can be reset once the oil has been changed.
How do you reset service indicator for a 2000 Mercedes ml?
I just did this to my ML430 and it worked. I can't attach a picture of the instruction page so if you would like this information just email me and I will send the instructions (FREE). scout2401@comcast.net
How do you reset the service indicator after an oil change on a 2000 BMW z3?
To reset the service indicator on a 2000 BMW Z3 after an oil change, first turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal fully three times within five seconds. Afterward, turn the ignition off, and when you turn it back on, the service indicator should be reset. If it doesn't reset, you may need to repeat the steps or check for any additional issues.
How do you reset the performing service light indicator on a 2000 Jeep Cherokee?
Key on, close doors. Press "step" until "0 miles to service" is displayed. Press and hold "reset".
How do you reset ac after refill for Mercedes e430 2003?
How do you reset ac after refill for Mercedes e430 2000
How do you reset service light on ml 320 mercedes 2000?
I did the oil change on my 2000 ml 320 but the dash still displaying -10 D and i have tried to do the reset following the procedurs but the two little wrenches are there and
How do you reset the service indicator warning on a 2000 Mercedes C180 W reg after having it serviced?
I believe I read somewhere of a suggestion that the answer can be found in the owner's manual. I would try and find out by looking it up in a repair manual at the library, buying a repair manual, or having it reset by the person who services the vehicle (if they have the diagnostic hardware to read and reset the onboard computer). Hope this helps!
How do you reset service B on 2000 Mercedes Benz clk 320?
A helpful fellow from BenzWorld gave this answer for your year and model: •Turn key to position 2, engine off. •Scroll the information menu using the left side steering wheel buttons to the "Service A/B exceeded by xxx miles" indicator, NOT to the odometer display •Press and hold the (R) trip odometer reset button at the left of the dash for about 4 seconds until a "Do you want to reset service interval" display appears •Release the button •Press and hold the (R) button again until the Service indicator display indicates its been reset. The display changed to "A service due in 10,000 miles." Most descriptions I've seen say to start at the odometer display. At least on my 2000, you must start at the service indicator display. Makes sense, actually. Good luck with this as I have seen these processes fail time and time again. The best way to get this done, in my humble opinion, is to drive into the service bay of your friendly neighborhood Benz dealer and ask them to do it for you.
How do you reset radio code in 2000 ML320 Mercedes Benz?
hi i want to know my car year 2000 Mercedes ML 320 radio code.please
Reset service engine soon light on 2000 Nissan?
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
