Does this vehicle use the FSS system? If so:
-First remember to perform ALL of the procedures MB recommends at this service interval. Failure to do so may result in an unsafe condition.
-Do not use oil that hasn't been approved by MB for your vehicle unless the oil is cheap enough to justify sacrificing 90% of your engine's expected service life. This engine if fairly expensive, BTW.
-Turn the key to the on position.
-Press the buttons on the steering wheel to display the 'Basic' screen.
-Then, press the up arrow.
-Press the reset button near the left side of the instrument cluster.
mb 1004
I reset the FSS by refering to the Owner's Manual.
To reset the service indicator on a 2004 BMW M3, first turn the ignition to the "ON" position without starting the engine. Then, press and hold the trip odometer reset button on the instrument cluster. While holding the button, turn the ignition off and then back to the "ON" position. Continue holding the button until the service indicator resets, and then release it to complete the process.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
To reset the service indicator on a 2004 Viano van, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn off the ignition, then start the engine to check if the service indicator has been reset. If it hasn't reset, repeat the process.
You just go to the Service and they will change the oil for you
How do I reset oil indicator on bmw 325 1987?
I am sure this is not the proper way to reset the light, but I disconnected my battery cable for ten minutes and it fixed the problem.
To reset the service D message on a 2004 Mercedes E-320, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to check if the service light has reset. If it hasn’t, repeat the steps.
Refer to the service and the user manual to see how you can reset the motor indicator on the Ford Mondeo 2.0 TDCI year 2004.
To reset the service light on a 2004 Mercedes-Benz Sprinter, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to verify that the service light has been reset. If the light remains, you may need to repeat the process.
no