Service Reset instruction for 2006+ Sprinter (NCV3)
with NO steering wheel buttons.
1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the "O" button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select "reset 51"
4. Now, when appropriate oil type is selected press "O" for 6 seconds until ''2'' is displayed.
5. Press "O" once again briefly and the '' reset done'' message will confirm that the job is done.
6. Pull the Key out (info found on: Sprinter-Source.com)
How do you reset the service indicator on 2007 Mercedes vito
Exactly the same as the 2008.
with the dealer computer.
mercedes benz vito 111 service reset
To reset the service indicator on a 2007 Mercedes SL550, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to check if the service indicator has been reset. If the indicator is still showing, repeat the steps.
how to reset the brake service indicator on mini cooper s 2011
There is no reset for the key.There is no reset for the key.
To reset the service indicator on a 2007 Mercedes SLK 350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Afterward, turn the ignition off and then back on to verify that the service indicator has been reset. If successful, the service light should no longer be illuminated.
jaguar s type twin turbo diesel 2007. how to cancel "service required" indicator.
You have to have the computerized equipment- get to a mechanic/dealer who has one.
Go to yuotube and type there this question.
To reset the service indicator in a 2007 Audi A6, turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. Then, turn off the ignition and start the engine to verify that the service light has been reset. If the light remains on, repeat the process.