Go to your local VW dealer and ask for the screws that hold in the headlight, there are 4. I believe they are like an 8 or 10mm. or you could use small zip strips and put one through each hole.
changing the bulb
Torque specs for a 1998 Volkswagen jetta 2.0
No, not without modifications.
To replace the headlight assembly on a 1998 Isuzu Trooper, first, open the hood and remove the screws or bolts securing the headlight assembly, typically located at the top and side. Disconnect the wiring harness from the back of the assembly and carefully pull the old assembly out. Insert the new headlight assembly, reconnect the wiring harness, and secure it with the screws or bolts. Finally, test the new headlight to ensure it functions properly.
To repair a loose folding side view mirror on a 1998 Toyota 4Runner, slip a matchbook cover into the gap where it is loose. Any piece of cardboard will work. A person can also take the mirror off and secure the screw with plumber's tape if it is loose at the screw.
Should be on the back of the headlight.
my 1998 vr6 jetta gets approximately 23 mpg in city driving with 5 speed transmission.
The 1998 Toyota headlight have two adjustment screws. There is an adjustment screw on the top and bottom of the headlight. Turn the screws to adjust the headlight.
To change the headlight bulb on a 1998 Toyota RAV4, first, locate the back of the headlight assembly under the hood. Twist the headlight bulb socket counterclockwise to remove it. Carefully pull out the old bulb and replace it with a new one, being sure not to touch the glass with your bare hands. Reinsert the socket back into the headlight assembly and twist it clockwise to secure it in place.
We have a 1998 Bounder Motorhome (with ford engine) how do we replace the headlight switch?
Try AllData.com
why steam come out from the air conditioner exit , in a vw Jetta 1998 when engine gets hot