0
Loosen the Tensioner pulley and push against the spring, and put a nail in the small hole to lock the spring back. Align the Crank pulley, Intermediate shaft, and Cam pulley to TDC, look for the notches for reference. Then put the belt on the gears in that order, and re check. Then pull the nail, and lock the bearing in place to keep correct tension.
What else can I help you with?
Does it ruin 1986 Volvo 240 engine when timing belt breaks?
Depends on the motor. According to the Engish Haynes manual. B21 and B23 will not, B230 will.
Which direction does the distributor rotor turn on a Volvo 240?
it turns clockwise. Firing order of Volvo 240 w/B230 1342
1990 Volvo 240 timing belt marks?
how do adjust timing belt on a volvo 240 DL ?
Set timing on a Volvo 240?
To set the timing on a Volvo 240, first, ensure the engine is at operating temperature and then turn off the engine. Locate the timing mark on the crankshaft pulley and the timing pointer on the engine block. Start the engine and use a timing light to check the timing; adjust the distributor as necessary to align the timing mark with the specified degree (usually 12-16 degrees BTDC for the B230F engine). Finally, tighten the distributor hold-down bolt and recheck the timing to ensure it remains accurate.
How do you reset engine Light on 1991 Volvo 240 DL?
how do you reset engine light on 1991 volvo 240
Timing specs for 1983 Volvo 240?
From Spokane Volvo Jag and Land Rover......the initial timing is 10 to 12 degrees!
How do you adjust timing 1993 Volvo 240?
To adjust the timing on a 1993 Volvo 240, first, ensure the engine is at operating temperature and then turn off the ignition. Locate the timing marks on the crankshaft pulley and the timing cover, and use a timing light to check the current timing. If adjustment is needed, loosen the distributor hold-down bolt and rotate the distributor slightly to advance or retard the timing as necessary. Once adjusted, re-tighten the bolt and recheck the timing to ensure it's within the specified range.
Is the 240 Volvo engine an interference fit motor?
Yes
How to change 1989 Volvo 240 dl timing chain or belt?
To change the timing belt on a 1989 Volvo 240 DL, first disconnect the battery and remove the front engine cover. Align the timing marks on the crankshaft and camshaft to ensure proper timing, then remove the old timing belt by loosening the tensioner. Install the new belt by following the same routing as the old one, ensuring it's tight but not overly strained, then reassemble the engine components and reconnect the battery. Always refer to the vehicle's service manual for specific torque values and procedures.
How many horsepower does the engine in the 2015 Volvo XC60 have?
The 2015 Volvo XC60's engine produces 240 hp @ 5600 rpm.
How many horsepower does the engine in the 2015 Volvo XC70 have?
The 2015 Volvo XC70's engine produces 240 hp @ 5600 rpm.
How many horsepower does the engine in the 2013 Volvo S80 have?
The 2013 Volvo S80's engine produces 240 hp @ 6400 rpm.
