Use the same procedures as for the ATHM4801 model listed below:
Without knowing the make and model no-one can tell you how to do it.
I have an ATHM4801 model and on that one you press and hold button 4 ('Reset' on the lower right), while holding button 4 press button 2 ('Mode' on the lower left). If all the days are visible when you press button 4 then the hourly chime is on. If the days are not displayed then the chime is off.
To deactivate the hourly chime on an NFL scoreboard clock, you typically need to access the scoreboard's control panel or software interface. Look for settings related to audio or alerts, and you should find an option to disable the hourly chime. If you're using a specific scoreboard model, consult the user manual for detailed instructions. If issues persist, contacting technical support for the scoreboard may be necessary.
To set the chime on a Cardinal watch, first locate the crown on the side of the watch. Pull the crown out to the second or third position, depending on your model. Rotate the crown to adjust the chime settings, usually indicated by a series of clicks or a digital display. Push the crown back in to save your settings and activate the chime.
I have the AW21300W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)If you want the chime on, press button 4 and hold while you press button 2. When all the days show, the chime is on.
Press and hold the botton on the top left of the watch to enter time setting, then press the button on the bottom right to switch alarm (clock icon) or chime (bell icon) on or off. See related links for a user manual for the Coleman Model 40-725 watch.
To set the unlisted watch model UL 1190, first, gently pull the crown out to the second position to stop the second hand. Turn the crown to set the time, ensuring the hour and minute hands are correctly aligned. Push the crown back to its original position to restart the movement. If the watch has a date function, you may need to set the date by pulling the crown to the first position and turning it in the appropriate direction.
how do you pair it up
To repair a Howard Miller Barwick Floor Clock Model 4882 that runs but won't chime, first ensure that the chime mechanism is properly engaged by checking the chime selector lever, which may be set to "silent." If the lever is correctly positioned, inspect the chime weights and the mechanism for any obstructions or misalignments. Additionally, check for any worn or damaged gears in the chime assembly that may need lubrication or replacement. If the issue persists, consulting the manufacturer's manual or a professional clock technician may be necessary.
To cut off the door chime for the Dictograph G4100DLX, locate the chime switch on the unit. This is usually a small toggle or button that can be set to the "off" position. If the device has a volume control, you can also turn it down to mute the chime. For detailed instructions, refer to the user manual specific to your model.
To disconnect the chime in a 2005 Subaru Outback, locate the chime module, which is often found under the dashboard or near the fuse box. You can either unplug the module or remove the fuse associated with the chime system. Alternatively, for a temporary solution, you can try to mute it by turning the ignition on and off quickly while pressing the chime button, if available. Always consult the vehicle's manual for specific instructions related to your model.
model of watch or the most exspensive model that wears a rolex watch