what is the odometer button
On a Renault Clio washed car but Rear indicator lights still on and can't turn them off?
Get it serviced
You have to repair the part that caused the light to come on.
To turn off the service light on a Renault Clio, first ensure that the vehicle is in the "ON" position without starting the engine. Then, press the trip reset button on the dashboard until you see the service interval display. Finally, hold the button for about 10 seconds until the service light resets. If the light remains on, consult the owner's manual for specific model instructions.
Try disconnecting the battery for about 10 minutes - sometimes it works
To turn off the service light on a 2001 Renault Clio, you typically need to reset the service indicator after performing maintenance. First, turn the ignition key to the "On" position without starting the engine. Then, press and hold the trip reset button on the dashboard while turning the ignition back to the "Off" position. Release the button, then turn the ignition back to "On," and the service light should be reset. If it remains on, consult the vehicle's manual for specific instructions or check for any unresolved issues that may require attention.
To reset the service light on a Renault Clio, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn off the ignition and start the engine to check if the service light has reset. If the light remains on, you may need to repeat the process or consult a professional.
inside the uch
I have an 05 Renault Clio and i can't seem to find how to even turn the side lights on?Any help?
To switch off the spanner light on a 2007 Renault Clio, you typically need to reset the service indicator after performing any required maintenance. This can be done by turning the ignition to the "ON" position without starting the engine, then pressing the accelerator pedal three times within 10 seconds. After this, the spanner light should turn off. If the light remains on, it may indicate an ongoing issue that needs to be addressed.
To reset the spanner light on a Renault Clio, first turn on the ignition without starting the engine. Then, press the accelerator pedal fully three times within five seconds. After this, turn off the ignition and start the engine to verify that the spanner light has been reset. If it remains on, the procedure may need to be repeated or there may be an underlying issue that requires attention.
To switch off the service indicator on a 2008 Renault Clio, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the service indicator begins to flash. Once it starts flashing, release the button, and then press it again until the indicator turns off. This should reset the service light.