The light will have to be turned off with a reset tool at a dealer, or by someone with the tool. It is likely that the fault code stored is due to a malfunctioning sensor in the drivers side seat belt connection. Part is around $175 with 1.5 hrs to install. It does have to be reset by either a mechanic or a BMW Stealer. The most common cause is the Passenger Occupancy Sensor Pad which affects 3 out of 5 Bmw's pre 2002. The cost of replacement is in excess of $500 but an alternative can be found on auction sites under BMW Airbag Sensor Bypass Unit.
For the airbag light to turn off, you'll need to repair the cause of the airbag malfunction, or disable the airbag by using a BMW scan tool or other software.
When the airbag light comes in in a car, it means that there is a problem with the airbag. In order to get the light turned off, one must take it to a technician.
The airbag light can be reset by resetting the entire control display on most cars. This is the same for a Z3 BMW.
Disconnecting the battery is the easiest way. Then disconnect the airbag.
Uh oh. Don't drive that car anymore. The airbag is broken and might go off at any time. You need to get a new airbag (or car)
316 İA 1997
The BMW E36 cars do come standard with an airbag. This awesome car also has a safety light to let you know that your airbag is on and working properly.
No, it's not in the seat, it's in the dashboard in front of the passenger.
To reset the airbag light on a 1996 BMW Z3, you will typically need to use a BMW-specific diagnostic tool to clear the fault codes from the airbag system. Alternatively, you can disconnect the car battery for about 10-15 minutes, then reconnect it, which may reset the light if there are no ongoing issues. However, if the light persists, it’s advisable to check for any underlying problems with the airbag system to ensure safety. Always consult your vehicle's manual or a professional mechanic for accurate guidance.
The standard 2001 BMW z3 Coupe does not have a switch to turn off the airbags. However, you can have this switch installed by the dealer as an upgrade.
To turn off the airbag light on a 2001 BMW X5, first, check for any issues with the airbag system, such as loose connections or faulty sensors. If no problems are found, you can reset the light using an OBD-II scanner compatible with BMW vehicles; simply connect the scanner, read the codes, and clear them. If the light remains on, it may indicate a persistent issue, so it's advisable to consult a professional mechanic for further diagnostics.
The emergency fuel shut off switch is located inside the airbag control module on the BMW M5. When the airbag is deployed, the switch will turn off the fuel pump.