answersLogoWhite

0

What else can I help you with?

Related Questions

How do you change a front coil spring on a Peugeot 206?

How long does it take to change a front coil spring on a Peugeot 206


Oem coil spring compressor part 27035 is this compressor strong enough to use on your gmc sierra 2500 or do you need a different coil spring compressor?

I would not use this on a Heavy duty type of spring. This has a tendency to slip off the spring and does not have a long range of travel.


Is it legal to change the dodge sprinter van logos and grill to make it look like a Mercedes?

AS long as it is not sold as a Mercedes.


How long can a Mercedes Benz go without an oil change?

I've owned Mercedes Benz since I was 19, and they are the best for oil changes. The oil change is every 25,000 km.


What is the correct way to use a spring compression tool used to change struts?

Understand, at any point you can loose a finger, or kill yourself. Other than that, no problem. Strut is out of the car. The tool for struts is two long bolts with hooks on each end. Extend the bolts as far as possible to catch the last loop of the coil spring possible. Place on each side of the spring and tighten each a bit until the spring comes away from the plate at the top of the coil. With the spring compressed remove the center nut on the strut. An air impact is the only real way to do this. Remove the top plate, remove the spring, still compressed, and change the strut. reverse the process to assemble. Make sure the ends of the springs are seated in the notch in both top and bottom plates when removing spring compressors. Loosen each a bit till loose. You CAN NOT use the compressor for older coil springs that have one bolt in the middle.


How long does it take to change 6 coil packs on a 99 lincoln navigator?

Good question.


How do you remove coil springs?

You buy or rent, if possible, coil spring compression tools. They are long all-thread hardened bolts with a part at each end that slips over the coil. Turning the bolt will bring the end pieces together and compress the spring to allow it's removal. As a rule, if this is the front end of a vehicle, you will also have to remove either the upper or lower ball joint.


How do you change the spark plugs in a Ford F-250 5.4 Ford?

pull the coil packs off and get a long socket, or a long extension


How long does it take to change timing chain on a Mercedes 380 sec?

It's takes me about three hours labor.


What do you space for tattoo shading?

You want to set your machine up as a long stroke for shading. Soft spring action, and about a 2 nickel space on the top coil. You want a soft spring and long stroke so that the needle physically takes longer to hit the skin. Keep your voltage down low.


How long is a Mercedes Benz e320 transmission dipstick?

how long is the tranmission dipstik on Mercedes Benz Ml


What is a long coil of wire with many loops called?

a long wire with many coils is called a coil