ONE so ive searched out!
The Peugeot 307 typically has two reverse lights, one on each side of the rear of the vehicle. These lights activate when the transmission is in reverse to alert other drivers and pedestrians. If you're unsure, you can check the vehicle's manual or inspect the rear lights directly.
Because I don't maintain it properly.
The fuse for the left brake light is # 5 and the right and 3rd brake light fuse is # 17 in the fascia fuse box
I've just bought a Peugeot 307 hdi. I took it back because (I thought) the right side reverse light wasn't working. The garage told me there isn't one!
position lights are your side lights
The fuse for the reverse light on a Peugeot 307 is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box cover labeled with a diagram indicating the specific fuse for the reverse lights. Refer to the owner's manual for precise fuse location and specifications to ensure you're checking the correct one. If the fuse is intact, the issue may lie elsewhere in the reverse light circuit.
how do you remove service warning light on 307
The Peugeot 307 has several warning light symbols with different meanings. The oil can symbol means an oil change is needed while the exclamation point means the tire pressure is low.
The way that a person would release the spare wheel on a Peugeot 307 when the release handle comes off is not available. It is best to contact a dealer or a mechanic for further information.
To remove the LED display on a Peugeot 307, first, ensure the vehicle is turned off and the battery is disconnected for safety. Carefully pry off the surrounding trim using a flat tool to access the display unit. Unscrew any fasteners holding the LED display in place, then gently pull it out while disconnecting any wiring harnesses. Replace or repair as needed, then reverse the process to reinstall.
No load: Front: 2.5bar Rear: 2.5bar Max load: Front: 2.5bar Rear: 3.2bar
There could be several possible reasons why the brake lights stay on all the time on a 307. The most common reasons would be a bad relay or a bad switch.