How much antifreeze do a Ford Focus take?

Answer 1

it is a 50/50 mixture. Half antifreeze/coolant - half water. It is imperative that you follow this procedure when refilling, and use Distilled Water to mix with the pure coolant. After you complete this step you fill the system to the line in the de-gas bottle or usually known as the over-flow bottle. Total system volume unknown. There are probably depending on the Engine and Transmission combination. Refill CAUTION: When draining the engine coolant or changing any cooling system components, it is imperative that the coolant that is drained be refilled with the same specification of coolant. Failure to follow this instruction can result in damage to the cooling system and can cause damage to engine. Disconnect the heater supply hose from the engine.(Top hose of the Thermostat housing leading to the firewall) Using a funnel, fill the cooling system through the supply hose until the coolant starts to trickle from the engine (with the T-Stat housing removed). Reconnect the heater supply hose. NOTE: Make sure that the in-vehicle heater temperature control is in the HOT position and the heater blower switch is in the OFF position. Make sure the air conditioning is switched OFF. Ummm i do believe they said how much, not what kind or how to change it !!!!!!!!!!!!!!!!!