If it has a 4.6 V8 it needs 1 3/4 Gallons antifreeze and then fill with water.
Most antifreeze will work in any engine. For diesel engines in general, use a good long life coolant that includes nitrates (red stuff). For regular (green) coolant, most diesel manufactures require you to add your own nitrates or DFCA to this mix to prevent pitting of the cylinder liners. Check with your engine manufacturer for specifics.
How much antifreeze does a 1998 chevy mabilu ls take
To obtain a solution that is twenty percent antifreeze, you would add 4 parts water to 1 part antifreeze. This means that for every 1 part of antifreeze, you would add 4 parts of water. This would result in a total of 5 parts of solution, with 1 part being antifreeze and 4 parts being water, achieving a solution that is twenty percent antifreeze.
you open the plastic bottle and pour in the antifreeze
You can add it to the coolant reservoir. It's located in the top left corner of your engine. Make sure your car is cool before you add in the antifreeze.
Yes. Never add pure antifreeze. Pure antifreeze will actually freeze before a 50/50 mix. Add coolant that is a 50/50 mix of antifreeze and distilled water. You can buy it already pre-mixed.
in overflow jug
To add antifreeze to a Renault Scenic 1.5 diesel, first ensure the engine is cool for safety. Open the hood and locate the coolant reservoir, which is usually a plastic tank marked with "min" and "max" levels. Remove the cap and pour the appropriate mixture of antifreeze and water (typically a 50/50 blend) into the reservoir until it reaches the "max" level. Replace the cap securely and check for any leaks before starting the engine.
for an S series from empty it is about 7 qts. 50/50 water/coolant.
To create a 45% antifreeze solution from 1 gallon (128 ounces) of pure antifreeze, you need to determine how much of the solution should consist of antifreeze. Since you want 45% antifreeze, you can set up the equation: 0.45 * (128 + x) = 128, where x is the amount of water added. Solving for x, you find that you need to add approximately 104 ounces of water to achieve a 45% antifreeze solution.
The cooling system in most vehicles has a reservoir and the reservoir is marked full and add. Open the cap when vehicle is totally cooled down and add a mixture of 50% water and 50% antifreeze and be sure to add the correct antifreeze for your vehicle. Never add just plain water unless it is an emergency to get you to a garage.