0
What else can I help you with?
Labor time on 2003 gmc sierra intake gasket?
I was just quoted 5.5 hours labor to R&R the intake gasket on my 1998 GMC Sierra 5.7 Liter.
Why antifreeze in oil suzuki sidekick could it be the intake manifold?
No, it couldn't be the intake manifold. The only way is if it was the head gasket or the trans. cooler in the radiator. But that's only if you have an automatic transmission.
What will cause coolant to get in oil head gasket or intake gasket?
The Intake gasket is leaking, NOT THE HEAD GASKET. Replace the intake gasket
What is a intake gasket?
The intake gasket is the gasket that conncects from your air filter into your intake manifold
How do you fix intake gasket on 2000 lasabre?
The only fix for a bad intake gasket is to remove the intake manifold and replace the gasket.
WHere do you hook up the vacuum lines from the modulator on a TH400 automatic transmission?
engine vacuum or direct into the intake.
Why do you have oil in your overflow bottle?
If is oil then you have a bad intake manifold gasket. If it is transmission fluid then the cooling tank in the radiator is bad.
Where could engine coolant be leaking from on rear topside of engine on a 1998 350vortec it pours coolant out but can't see where from?
It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely.
Do you have to replace the intake gasket when removing intake manifold?
Yes, you must install a new intake manifold gasket.
What type of intake manifold is better to use on a 327sb bored 40 over a dual or single plane intake manifold?
Manual transmission use single plane. Automatic transmission use dual plane.
Where do the transmission vacuum hose for a 1987 ford f150 go to?
The Vacuum line for an automatic transmission runs from the modulator valve on the rear of the transmission to a vacuum port on the intake of the engine. Any available port will do as long as it is on the intake, not the carburetor if so equipped.
Can you use a sealer to fix the intake gasket leak?
NO. You MUST replace the intake gasket.
