open the trunk, then remove all the plastic snap fasteners (they are all 2 piece, remove the center piece with a flathead screwdriver and then once that is out, it looks like a plastic "nail", then remove the larger piece with a flathead screwdriver because the larger piece is actually snapped into the metal). there are about 8-10 of them. once you have them out the entire "carpet like" interior piece will come loose. You can then see up into the area where the license plate bulbs are and replace them. I just did it two hours ago. open the trunk, then remove all the plastic snap fasteners (they are all 2 piece, remove the center piece with a flathead screwdriver and then once that is out, it looks like a plastic "nail", then remove the larger piece with a flathead screwdriver because the larger piece is actually snapped into the metal). there are about 8-10 of them. once you have them out the entire "carpet like" interior piece will come loose. You can then see up into the area where the license plate bulbs are and replace them. I just did it two hours ago.
how to replace the license plate bulb on a 2004 Honda cr-v
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
how do you replace a honda crv licence plate bulb on a 2004
You have to replace it by crawling under the bumper. It may be handy to have a flashlight with you. Twist and/or pull the bulb out to replace.
To replace a bulb in the center console of a Mercedes CLK W208, first, ensure the car is turned off. Carefully pry off the trim surrounding the console using a plastic trim tool to avoid damage. Once the trim is removed, locate the bulb holder, twist it counterclockwise to release it, and replace the old bulb with a new one. Finally, reassemble the trim and ensure everything is securely in place.
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
Remove the two 10 millimeter screws and pull the housing down and replace the bulb
You need to unscrew the whole cover panel for license plate.
unbolt lens, remove bulb socket quarter turn
To replace the license plate bulb on a 2003 Chevy Tracker, first, locate the license plate light assembly at the rear of the vehicle. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise and then replace it with a new bulb, ensuring it’s secure. Finally, snap the lens cover back into place and test the new bulb to ensure it works.
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
Ask your car dealer...