Resetting FSS
1 Turn key to position 2 (before Start)
2 Within 4 seconds press button 1 twice (left of speedo)
3 The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0 ( position where key can be removed).
4 Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1.
After 10 seconds a signal sounds, and the display shows 15,000 km or 10,000 miles for 10 seconds.
5 Release button 1.
how do I reset my service engine light on my 1999 ford f150
How do you reset service indicator message for A 1999 Mercedes Benz ML320 after service A or B is completed?
About 6.3 US quarts
The torque converter on a 1999 Mercedes SLK230 is located within the transmission assembly. It is situated between the engine and the automatic transmission, specifically bolted to the flexplate of the engine. To access the torque converter, the transmission typically needs to be removed from the vehicle. Always refer to a service manual for detailed instructions when working on transmission components.
A combination of pulling and pushing the 2 speedo buttons at the same time. This should reset the service light.
you will need a scan tool to determine the cause and to reset
With an OBD2 scanner.
Have vehicle scanned to determine the problem
Check out G20.net
Hello , Does anybody knows how to reset the service message on E430 MB 199. Thanks Denis Hello , Does anybody knows how to reset the service message on E430 MB 199. Thanks Denis
A mechanic can reset the service engine soon light on a 1999 Mustang GT. If the light continues to stay on after visiting a mechanic unplugging the battery for a few minutes may get it to stay off.
To reset the service light on a 1999 Volkswagen Polo, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service light has been reset. If the light remains on, you may need to repeat the process.