0
The heater motor on the Peugeot 306 is under the glove box, in the passenger footwell.
First, remove the sound proofing panel, this clips off. Inside you will see the fan assembly is offset towards the left side (towards the passenger door hinge). There are 3 screws which need to be remove, 2 of which are towards the front, near the 3 pin electrical block which supplied power to the heater blower motor.
Unscrew the 3 screws after removing the electrical connector. A sharp tug downwards will free the motor itself, and a little twisting and turning will remove it. You should be able to do this in about 10-20 minutes usually.
Replacing is simply the reverse of this. I would suggest that any replacement motor is tested before you fit it in, it takes only a few seconds to test and will save you time.
What else can I help you with?
Why is heater fan blowing Peugeot 306?
Could be a Faulty relay.
How do you change the fan belt on a peugeot 306?
fanbelt on a 306 hdi how do fit it
Change heater matrix on 306?
is it difficult to change a heater matrix on a t reg puegeot 306 td
How do you fit a peugeot 306 gti front wiper motor?
plug it
Can you use Peugeot 405 windscreen wipper motor to work on a Peugeot 306 car?
Yes. Most peugeot parts are interchangeable.
How do you change a thermostat on Peugeot 306?
really easy fix! what model 306 is it? regards, Simon
How do you change a indicator stalk on your 306?
how to remove indicator stalk and cowl from Peugeot 306 lx
What do you need to fix fan heater on peugeot 306?
To fix the fan heater on a Peugeot 306, you typically need a multimeter to diagnose electrical issues, basic hand tools (like screwdrivers and pliers) for disassembly, and possibly replacement parts such as fuses, relays, or the blower motor itself. Begin by checking the fuse and relay associated with the heater fan circuit. If those are intact, you may need to inspect the wiring and connections for any damage or corrosion. If the blower motor is faulty, replacing it would resolve the issue.
How change wiper blade peugeot 306?
To change the wiper blade on a Peugeot 306 unclip the old part from the mount. Take the new wiper blade and slide it into place until it clicks.
How difficult is it to Fit a starter motor for peugeot 306?
i dont know how to fit a stater moter!!
How do you stop peugeot 306 over revving when changing gear?
Try changing or cleaning out the stepper motor, this controls the idle and is a common fault on the 306.
How do you change a brake pipe on a Peugeot 306?
A Big Hammmer or angle grinder
