How do I reset the Service A/B on a CLK 350
how can i reset the service b message on the mercedes clk 430?
To reset the service indicator on a Mercedes-Benz CLK 200, turn the ignition to the "On" position without starting the engine. Press the gas pedal fully three times within 10 seconds. After doing this, the service indicator should reset. If successful, you will see a confirmation message on the display.
To reset the service light on a 2002 Mercedes CLK 320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off and then back on to verify that the service light has been reset. If it remains lit, repeat the process.
Trade the car in for a Nissan.
disconnect the battery. you will have to reset everything. maybe someone has a better answer.
You would have to have service B performed by a authorized Mercedes Benz technician. There is a special laptop they hook up to the cars after these services are performed in order to get rid of that message on your dash. On the CLK 320 Cabrolet you have to perform a series of actions on your dash i.e. reset button etc. to reset the service reminder. There is no plug in for a Mercedes techniciam to reset the reminder.
To reset the maintenance light on a 2006 CLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on, and the maintenance light should be reset. If it doesn’t turn off, repeat the steps.
It's easy, just go to MB store!!
To reset the service indicator on a 2008 Mercedes CLK 350, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service indicator has been reset. If the indicator remains, repeat the process.
Turn on ignition find on centre display service it will ask you if you want to reset you the push and hold black button on left hand side of the dials for 5 seconds
To reset the SRS (Supplemental Restraint System) light on a Mercedes CLK 320, you typically need a diagnostic scanner that can access the airbag system. Connect the scanner to the OBD-II port, read the codes, and clear them. If the light persists, check for any underlying issues with the airbag system before attempting to reset. Always ensure that any repairs are completed before resetting the light to ensure safety.