answersLogoWhite

0

Could possibly be a messed up vacuum hose. Not sure where it is located.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Your engine revs when you dont hit the gas?

An engine revs when you hold down the gas and the brakes at the same time. ~Ares


1992 SVX No reverse but goes forward OK What could it be?

It could be the throttle position sensor.. Mine SVX had the same problem but if you want to get a quick fix, try this: Start engine Put to reverse Give it some revs AND WATCH THERES NOTHING BEHIND YOU!!! It just might jump back to its place, mine did. And you might want to check the trnsmission oils etc..


How come the engine only revs up when gas is applied in a 98 Chevy blazer?

Because that's how an engine runs. it can only ever rev up if you give it gas. no gas, no revs. more gas, more revs


Engine revs for Audi a3 1.6 petrol?

What revs should my audi 1.6 show at seventy miles an hour and how many revs should it show when ticking over


Why the engine revs is going higher when pressing clutch down and changing gears?

Every time you engage the clutch, the clutch disengages from the transmission/engine. Which in term engine revs up, until you disengage the clutch.


If the engine revs up when you put it in park and now it is tugging when you drive as the rpms go up what might be causing this?

The most likely cause is a stopped up fuel filter. Replace it and if that doesn't do it, check the fuel pump preasure. If ok, it could be a stopped up cat convertor.


What are the Merits and demerits of the plates?

Pro: you are able to change gear when your engine revs are different from your transmission revs. Con: when torque is high or the difference in revs (see above) is too big, it will slip.


When you put the car in reverse it revs high and moves slow?

The reverse is "shot" on your transmission. You'll need to either rebuild/replace the transmission or get another vehicle.


What are the merits and demerits of plate clutch?

Pro: you are able to change gear when your engine revs are different from your transmission revs. Con: when torque is high or the difference in revs (see above) is too big, it will slip.


Why might a 2000 ford focus automatic transmission not accelerate when the gas pedal is pressed even thought the engine revs up?

Try checking the transmission fluid.


Where can you get your engine VIN number check?

https://online.revs.nsw.gov.au/revs/public.htm


What is the hp of a 1967 273 ci engine-4 barrel?

This engine was rated at 235hp at 5200 revs.