if you have lost the locking wheel nut key to remove the locking wheel nut then you can still remove the nut by getting a socket that is a tight fit on the nut and hammering it onto the locking wheel nut then it will undo. i worked in a garage for a few years and everytime a car came in with your problem that's how we solved it.
AdditionMost breakdown patrols and breakdown garages carry special tools for the removal of locking wheel nutsTo change the indicator arm on a Peugeot 206, first disconnect the battery to ensure safety. Remove the steering wheel by unscrewing the central bolt and using a steering wheel puller if necessary. Next, detach the plastic steering column cover, then unscrew the old indicator arm from its position and disconnect the wiring harness. Finally, install the new indicator arm, reassemble the steering column and wheel, and reconnect the battery.
The Volkswagan Beetle had a 5 bolt wheel pattern since 1938.
1984
on the side of gearbox at top a remove ns wheel to see it its an 8mm hexagen shaped bolt
Peugeot 306 wheels generally will not fit a Peugeot 107 due to differences in bolt patterns, offset, and wheel sizes. The 306 typically has a larger wheel diameter and different specifications compared to the 107. It's essential to check the specific measurements and compatibility before attempting to fit wheels from one model to another. Always consult a professional or refer to the manufacturer’s guidelines for the best results.
To remove the spare wheel from a Peugeot 307, first, locate the spare wheel compartment, usually found in the trunk under the floor panel. Lift the panel and use the provided tools to loosen the securing bolt or clamp that holds the spare wheel in place. Once it's loose, carefully lift the spare wheel out of the compartment. Finally, ensure everything is securely placed back in the trunk before closing it.
Usually, the bolt to remove the steering wheel from the column is located at the point where it attached to the column. If your steering wheel has a pressure switch for the city horn located in the center of the steering wheel, you'll have to remove it to access that bolt.
To change the front shocks on a Peugeot 206, first, lift the vehicle and secure it on jack stands. Remove the front wheel, then detach the shock absorber by unbolting the top mount located under the hood and the lower bolt at the suspension arm. Replace the old shock with the new one, ensuring it's properly aligned, and reassemble by tightening the bolts and reinstalling the wheel. Always ensure you follow safety procedures and consult the vehicle's manual for specific torque settings.
Almost all Peugeot passenger cars have the same bolt pattern and similar offset, so you can use fit your alloys on other models.Also Citroen has the same bolt pattern and similar offsets.Before you do something, it is always a good idea to check the wheel specs of the vehicle.Tip:Bolt pattern has to match and offset has to be similar.
Renault wheels can fit on a Peugeot, but it depends on several factors such as the specific models, wheel size, bolt pattern, and offset. Both brands use similar wheel specifications, but it's essential to check compatibility to ensure proper fitment and safety. Always consult the vehicle's manual or a professional before making any modifications.
take wiper bolt of then take bolts of from under boot discconect wire then refit new 1
It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern. It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern.