To change the indicator arm on a Peugeot 206, first disconnect the battery to ensure safety. Remove the steering wheel by unscrewing the central bolt and using a steering wheel puller if necessary. Next, detach the plastic steering column cover, then unscrew the old indicator arm from its position and disconnect the wiring harness. Finally, install the new indicator arm, reassemble the steering column and wheel, and reconnect the battery.
To change the indicator arm on a Peugeot 106, first disconnect the battery to ensure safety. Remove the steering wheel by unscrewing the central nut and using a steering wheel puller if necessary. Then, detach the plastic steering column shroud and locate the indicator arm assembly, which is typically secured with screws. Replace the old arm with the new one, reassemble the steering column, and reconnect the battery.
by buying a poptart
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
there is one unit attactch to the key barrel and plugs into the com 2000 unit (back of wiper /indicator arm )
To replace the front suspension arms on a Peugeot 206, start by safely lifting the vehicle and removing the front wheels. Disconnect the suspension arm from the chassis and the steering knuckle, usually involving the removal of bolts and nuts. Replace the old suspension arm with the new one, ensuring all connections are secure, and then reassemble the components, including reattaching the wheels. Finally, lower the vehicle and check for proper alignment and functionality.
To change the windscreen wiper arm on a Peugeot 106, first ensure the wipers are off and in the resting position. Lift the wiper arm away from the windscreen, then locate the release tab or nut securing the wiper arm to the spindle. If it's a nut, use the appropriate socket to remove it; if it’s a tab, press it to release the arm. Finally, fit the new wiper arm onto the spindle, ensuring it's securely attached, and lower it back onto the windscreen.
There's 2 answers to this question! ...and this is because Peugeot redesigned the wipers on 206's built around 2001, so...On older 206's (approx 1998 - 2000)Drivers side* = 19" (480mm)Passenger side* = 26" (660mm)*Note applies to UK spec models onlyOn newer 206's (approx 2001 - 2005)Both drivers & passenger = 22" (555mm)Rear wiper blades are 14" (355mm) however generic blades won't fit on the rear due to the arm design, so you will need to order rear blades specifically for the 206.
take the bottom ball joint bolts n nut out,take nut n bolt of front bush on wishbone ,go inside the front of the car and lift the carpet ,there is two nuts under there ,15 mm ones take them of ,reverse to put back on
located under the indicator arm
press the button! press the button!
You can change the wiper blades by removing the retaining clip to the wiper blade arm. The wiper blade will come off and can be replaced.
take it out and put in another