0
If the indicator relay is buzzing when the ignition is off, it may indicate a short circuit or a faulty relay. This can cause the relay to remain energized even without power from the ignition. It's advisable to check the wiring connections and the relay itself for any signs of damage or malfunction. If necessary, replace the relay to resolve the issue.
What else can I help you with?
Why Volvo 240 1993 indicator lights stay on when ignition is off?
If the indicator lights on a 1993 Volvo 240 remain on when the ignition is off, it may be due to a faulty ignition switch or a short circuit in the wiring. Another possibility is a malfunctioning relay or a stuck switch that fails to turn off the lights. It's advisable to check the vehicle's electrical system for any issues or shorts that could cause this problem. If the issue persists, consulting a professional mechanic would be beneficial.
What could be causing a brief intermittant buzzing noise on my Jeep Cherokee when the engine is first switched off?
It's your seat belt indicator light. Look at it when you first start your car when the light goes off so does the buzzing noise.
1987 ford truck shuts off?
it has to be a relay or ignition problem
How do you reset the service indicator in a peugeot 207?
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
Why does the indicator stay on and not flash on and off on my mini city e reg?
your flasher relay is malfunctioning.
How do you reset service indicator on citroen relay?
With the ignition off, hold the trip meter (the '000.0' button) in. Turn the ignition into the electric position. You will see a countdown go from 10 down to 0. When the counter hits zero, release the button. You then get a ==0== message. Now turn the engine on. That's it.
What causes the daylight runnuing lights to stay on after the ignition is turned off?
Bad relay
Reset service indicator on Mercedes c200 cdi?
To reset the service indicator on a Mercedes C200 CDI, turn the ignition to the "on" position without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. Finally, turn the ignition back on to verify that the service indicator has been reset. If the indicator remains, repeat the process.
How does a flashing indicator operate?
There is a relay switch in the circuit which switches the light on & off when you activate the turn signal.
How do you turn off the buzzing noise when you open the driver side door on a Chevy pickup?
Are the keys in the ignition? If so all you have to do is take them out when you open the door.
How do you reset service indicator in VW Golf Plus 2008?
First, turn on ignition and hold down right trip button while turning off ignition. Then, turn ignition back on and release right trip button. And then, turn left trip button to the right and release. Finally, turn off ignition. Service indicator should be reset when you next start the vehicle.
What does the green key indicator light mean on a 2000 Honda Odyssey?
I have a 2004 Odyssey. Here's what the manual has to say about the green key indicator on the instrument panel: "Immobilizer System Indicator. This indicator comes on when you turn the ignition switch to ON. It will then go off if you have inserted a properly-coded ignition key. If it is not a properly-coded key, the indicator will blink and the engine will not start. This indicator also blinks several times when you turn the ignition switch from ON to ACCESSORY or LOCK." Hope this helps!
