To reset the service indicator.
Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
The antipollution filter on a 207 peugeot comes as an indicator that the car has to be cleaned by reving it.
207 will not start 1.4 hdi above radio it says ecu fault
smash the clocks out with a hammer
Where is the IAT sensor in a peugeot 207
how to fix belt for peugeot 207 diesel
where is the fuel cutoff switch on the 2014-peugeot 207
In a 2011 Peugeot 207, the indicator relay is typically located in the fuse box. For this model, the fuse box is usually found under the dashboard on the driver's side or in the engine compartment. To access the relay, you may need to remove the fuse box cover and refer to the fuse box diagram for the specific location of the indicator relay. Always ensure the vehicle is turned off before attempting to access electrical components.
Peugeot 207 1.6 hdi cambelt change when is it due?
how to remove hex nut when changing oil filter on peugeot 207
To replace the front indicator bulb on a Peugeot 207, first, open the hood and locate the headlight assembly. Remove the corresponding cover or access panel to reach the bulb holder. Twist the bulb holder counterclockwise to release it, then pull it out to remove the old bulb. Insert the new bulb into the holder, replace it in the assembly, and secure everything back in place.