207 will not start 1.4 hdi above radio it says ecu fault
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
Disconnet the battery overnight in case the ecu has a back up. Reconnect it in the morning open the drivers door if you hear a beep its reset itself.
for ecu reset must disconnect cable battery for 45min and reconnect battery cable and start the engine
To reset the ECU on a Peugeot 307, you can disconnect the car battery by removing the negative terminal for about 15-30 minutes. This will clear any stored error codes and reset the ECU settings. After reconnecting the battery, start the car and let it idle for a few minutes to allow the ECU to recalibrate. Make sure to check for any stored fault codes afterward, as they may indicate other issues that need addressing.
Where is the IAT sensor in a peugeot 207
disconnect the battery for 45mins, with the doors closed. After 45mins reconnect the battery and open the drivers door and you should hear a beep. your ecu will be reset. then take it out for a drive trying to keep to around 2000-2500rpm for the ecu to calibrate to the parameters.
The best way to learn how to do this is to look at the users manual. It will have all of the steps that you need.
how to fix belt for peugeot 207 diesel
where is the fuel cutoff switch on the 2014-peugeot 207
The antipollution filter on a 207 peugeot comes as an indicator that the car has to be cleaned by reving it.
Peugeot 207 1.6 hdi cambelt change when is it due?
how to remove hex nut when changing oil filter on peugeot 207