answersLogoWhite

0

YES!!! the cable to tighten the brakes is pulled by an electric motor. Mine does noise as well, it is perfectly normal.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you reset the trip and hour meter on a 2005 vw passat?

On my 2002 Passat there is a reset button on the underside of the Windshield washer arm. Pushing that will clear the trip computer settings, per display.


What is the a button that looks like the park brake button on the Audi a8?

It is a electromagnetic Parking brake button. Press down to disengage and pull up to engage. you should hear a distinctive sound in the process that sounds like a low power electric drill. when the noise goes away after 2 seconds, the parking brake is engaged or disengaged. when engaged, the button will light up in red.


Where is the Service wrench button on a VW Passat?

The service wrench button on a VW Passat is on the dash in front of the driver. It is next to the mileage (0.0) button.


How do you turn off parking brake?

To turn off the parking brake, locate the parking brake lever or button in your vehicle. If it's a lever, pull it slightly and then release it to disengage; if it's a button, simply press it to deactivate. Ensure that the vehicle is in the "Park" position if it's an automatic transmission, or in neutral for a manual, before releasing the brake. Always check that the parking brake indicator light turns off on your dashboard.


What is the button for right above emergency brake released on a 1986 cutlass?

The button located above the emergency brake on a 1986 Cutlass is typically the release button for the parking brake itself. Pressing this button allows the driver to disengage the parking brake smoothly. If the vehicle is equipped with a console-mounted parking brake, it may also include a release mechanism for the brake. Always refer to the vehicle's owner manual for specific details and functions related to your car's features.


How do you undo your parking brake?

There should be a parking brake lever above the parking brake pedal that you pull to disengage the parking brake. It depends on the type you have; if it is a pull-up lever in your center console they can give you a little trouble. Pull it up slightly and while you have upward pressure press and hold the button on the end, than it will drop.


What button is located next to shifter in Ford Escape?

In the Ford Escape, the button located next to the shifter is typically the electronic parking brake (EPB) button. This button allows the driver to engage or disengage the parking brake electronically, offering a more convenient alternative to traditional handbrakes. Depending on the model year, there may also be a drive mode selector button or a sport mode button nearby. Always refer to the specific owner's manual for detailed information about your vehicle's features.


What is the Service wrench button on a VW Passat?

It's the button on the speedo next to the 0.0 button :D


How remove hand brake fiero 1987?

It isn't a single part, so removing it would be a problem. If you wish to disengage the handbrake, apply light pressure to the button on the end of the parking brake lever. Lift the lever upwards (there will be some resistance) until the button presses inwards. With the button held in, lower the lever to the floor, then release the button.


How do you work hornet alarm system rpn491?

First you need to press the lock/unlock button and hold it for one second. If you hear a chirp and your parking lights flash the system is engaged then.The led panel will flash once per second to show your vehicle is protected by the system. To disengage the protection you need to hold the same button as you previously did for one second. This will disengage the alarm system


How do you release the parking brake on a 2006Chrysler Pacifica?

To release the parking brake on a 2006 Chrysler Pacifica, locate the parking brake lever, which is typically found between the driver and passenger seats. Pull up slightly on the lever to disengage it, then press the button at the end of the lever while lowering it fully to release the brake. Ensure the vehicle is in gear or in "Park" before releasing the parking brake for safety.


How do you disingauage parking brake on toyoto Prius?

To disengage the parking brake on a Toyota Prius, locate the parking brake lever, typically found between the front seats. If it’s a traditional handbrake, pull it up slightly and press the release button while lowering the lever. For models with an electronic parking brake, simply press the brake pedal and then press the parking brake switch to release it. Always ensure the vehicle is in "Park" before disengaging the brake.