"Is it possible ot replace Land Rover TD5 gearbox with another model landrover gearbox?"
5t7j gear box
change starter on landrover freelander
scenic II gearbox oil
Yes, it is possible to replace a VW standard gearbox with an automatic stickshift gearbox, but it will require some modifications. You may need to alter the transmission mounts, driveshaft, and possibly the engine management system to accommodate the new gearbox. Additionally, ensure that the new automatic system is compatible with your vehicle's existing components and electronics for optimal performance. Always consult with a professional mechanic to assess the feasibility and necessary modifications for your specific model.
To replace the gearbox bearings on a Mitsubishi L200, first, ensure the vehicle is safely elevated and secure. Drain the gearbox oil, then remove the gearbox from the vehicle by disconnecting the necessary components like the driveshaft and linkages. Carefully disassemble the gearbox, taking note of the arrangement of parts, and replace the worn bearings with new ones. Reassemble the gearbox, refill with the appropriate oil, and reinstall it in the vehicle, ensuring all connections are secure.
Yes, it is possible for the speedometer drive in the gearbox of a Toyota Cressida to be out of position. This misalignment can occur due to improper installation, wear and tear, or damage to the gearbox. If the speedometer is not functioning correctly, it may be necessary to inspect and realign or replace the speedometer drive gear to ensure accurate speed readings. Always consult a professional mechanic if you're unsure about the issue.
No
tdi200 gearbox[ie LT77] is better than tdi300
The synchro cones in the gearbox are worn. Either a strip and replace or a whole gearbox swap is the cure.
If it is the gearbox, then you have to dismantle it and replace faulty parts, such as a gear fork. This could also be a clutch problem.
The mountings on the top will differ. It should fit the engine ok, but you will need to fabricate a new cradle to match the car's gearbox mounting position.
You have to remove the engine and gearbox. you will need a engine crane. Once you have the engine and box out, remove gearbox from engine and replace clutch, Refit gearbox to engine, put engine and gearbox back in car. Easy job if you have access to a engine crane.