Yes, it is possible to replace manual windows with electric windows on a 2008 Polo, but it requires several modifications. You would need to install electric window regulators, wiring harnesses, and switches for the electric operation. Additionally, ensure that the vehicle's electrical system can support the new components. This conversion may also involve professional installation to ensure compatibility and safety.
Electric or manual?
Window regulator controls the up and down motions of your car window. Both electric and manual windows have a window regulator. Not the easiest part to replace, but once you dissembled the door panel it should be fairly simple to replace.
To swap a manual crank car window for an electric window motor, first, remove the door panel to access the window mechanism. Disconnect the manual crank and carefully remove the window regulator. Install the electric window motor and regulator assembly in the door, ensuring it's securely fastened and connected to the power supply. Finally, reattach the door panel and test the electric window for proper operation.
Need instructions on how to replace a manual window regulator on drivers side on 1995 saturn
if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.
Replace the motor. Not and easy job. Get a manual on your car to do the job right. If the window motor still works then you might have to replace the window regulator. That is a common problem in the 3rd generation maxima (89-94). Hopefully this was able to help you.
The exact cost to replace an electric window motor varies slightly by the model of car. As of 2014, the average cost for this motor is between 35 and 55 dollars.
If they aren't closing all the way and you have manual windows you need to replace the regulator. If you have electric windows the gears in the window motor need to be replaced.
take the door apart remove all old parts and replace its just that easy
pop the clips that are holding the Electric window switch and pull the switch out replace it and place it back in with the clips. if you broke the clips you will have to replace them. they only cost 1.05 at Chevy shop....
sure it can be done if you have the money and the know how.
135 pounds plus VAT approx