You must remove the center console (shifter, parking brake). There's a gold box next to the parking brake assembly - this is the control for the auto seatbelt system. Here's the question though - ARE BOTH SEATBELTS INOPERABLE? If so, you most likely need a new control box (don't be lazy - go to a pick-n-pull yard). If not, you wil most likely need a new track and motor (these are both located in the side panel near the window trim. Peace and good luck!
YES!
The clock on a 240sx will not work if it is receiving no power or it is defective. Replacing the fuse and testing the wiring is the first step in troubleshooting.
It should be on the right hand side towards the front
if your car is automatic there should be no speed limiter, but if it is 5 speed manual, put an ECU out of an automatic 1996 240sx and the problem will be solved. im almost positive the ecu is OBD1 in the 1996, but make sure youre putting in the same OBD ecu.
No because the driveshaft and transmission are diffent sizes.
Yes, all auto transmissions from 89 to 98 are the same for the 240sx and are interchangeable.
there is no fill plug u fill transmission thru the transmission dipstick tube
As far as I know, it should have a gasket. Make sure to use gasket sealer as well when replacing it.
Nissan J-Matic Dexron 3 is also specified
Is a 1995 Nissian 240SX Engine compatible to 1992 Nissian 240SX?
I have researched this because I am considering making the conversion from automatic to manual transmission on my own 1995 240sx. It involves buying a manual transmission used from a junk yard or a rebuilt one, the clutch parts, a manual shifter, and the pedal with associated parts. there are actually lots of good resources to show you the specifics on how to do the work. Check out http://driftabout.com for links.
For a 1991 Nissan 240SX, you typically need to use Dexron III/Mercon automatic transmission fluid for the automatic transmission. If you have a manual transmission, it's recommended to use a high-quality gear oil, such as 75W-90 or 80W-90, depending on the specific requirements. Always consult your owner's manual for the most accurate specifications and recommendations.