To remove the hardtop from a 1992 Mercedes-Benz 300 SL, first, ensure the vehicle is parked on a flat surface. Open the trunk and locate the hardtop release mechanism; use the provided tool to unlock the latches on both sides of the hardtop. Carefully lift the hardtop off, ensuring you have a second person to assist, as it can be heavy and cumbersome. Once removed, store the hardtop securely to prevent damage.
You sure can, hard tops were made to fit the YJ, and removing the soft top is not too hard.
None were hard tops. All 300 built were soft top convertibles.
Yes they are the same fenders in the front.
NoNo
No.
a full size blazer top weighes about 250 to 300 lbs
The thermostat on a 1992 LeSabre should be inside of the top radiator hose inlet. You can easily change it by removing the top hose and water inlet.
yes
it will fit no problem
To remove the hard top from a 1992 Mercedes 500SL, first ensure the vehicle is parked on a level surface and the parking brake is engaged. Open the trunk and locate the hard top release mechanism, usually consisting of a pair of latches on each side of the windshield. Release these latches, and then, with assistance, carefully lift the hard top straight up and off the vehicle, ensuring to support it securely to avoid damage. Finally, store the hard top in a safe location.
No, the YJ top should not fit the TJ, it will look really close, but no cigar.
if you need a hard top for a jeep wrangler 1992. you can get one from any of these years. 1985-1997. jeep made the YJ series within these years. there for you can interchange most parts from any of these years. brandy