0
Disconnect battery for 10 minutes.Re-connect,then turn the key to second position for around 10 seconds. start the engine,and turn all electrical systems on eg, heater,lights, , stereo etc, (this allows the alternator to adjust for max load) run at idle until warm and the cooling fan cuts in. Ecu is now reset
What else can I help you with?
How can you reset an ECU on a Kia Sedona?
How can you reset an ECU on a Kia Sedona
Where is ECU reset button for a 1991 Toyota cressida?
There is no ECU reset button.
How do you reset the ecu for 97 Nissan 240sx?
you push the reset button on the back of the ECU.
How do you reset dash indicators Toyota Tundra?
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
How do you reset the ecu on BMW 316 compact?
Depend the number of the ecu and year of the car, general you can reset it, just recoded. The other option is, change the ecu and reset the ews and then you can redode the imobilizer with software machine. www.autocentralinas.com
How do reset Honda accord 2002 check engine light?
Have the ECU scanned with an OBD2 scan tool and then repair the problem. You can then try to reset the ECU by removing the negative battery cable for 5 minutes which may or may not reset the ECU. If it does not, it will have to be reset with the scan tool.
How do you reset the ecu on a 2001 Hyundai xg300?
how do i reset the computer on my hyundai xg300
How do you reset the ECU on a Mitsubishi Lancer?
To reset the ECU on a Mitsubishi Lancer, disconnect the negative battery terminal and leave it disconnected for about 10-15 minutes. This allows the ECU to clear its memory and reset. Afterward, reconnect the battery terminal, and start the vehicle to allow the ECU to relearn its parameters. It's advisable to drive the car for a short distance to help the ECU recalibrate settings.
How do you reset the ECU on a 97 nissan altima?
To reset the ECU on a 1997 Nissan Altima, disconnect the negative battery terminal and leave it off for about 15 minutes. This allows the ECU to clear any stored error codes. After 15 minutes, reconnect the negative battery terminal, and the ECU will reset. You may need to drive the car for a short period to allow the ECU to relearn the engine parameters.
How do you hard reset the ecu 2001 cherokee?
To hard reset the ECU on a 2001 Jeep Cherokee, first, disconnect the negative terminal of the battery and leave it disconnected for about 15 minutes. This allows the ECU to clear its stored data. After the time has elapsed, reconnect the negative terminal and start the vehicle. This process should reset the ECU and clear any trouble codes.
How do you reset the ecu in a Peugeot 207?
207 will not start 1.4 hdi above radio it says ecu fault
How do you reset ecu on s type?
Remove the battery for 15mins
