The "Service Engine" light on a Mercedes-Benz SLK 280 typically indicates that the vehicle's onboard diagnostic system has detected an issue that requires attention. This could range from minor issues, such as a loose gas cap, to more significant problems with the engine or emissions system. It's advisable to have the vehicle scanned for error codes at a dealership or a qualified mechanic to pinpoint the exact cause. Addressing the issue promptly can help prevent further damage and ensure optimal vehicle performance.
Model SLK 280 Engine with oil filter All Models 8.5 US qts
To reset the service reminder on a 2008 Mercedes SLK 280, first turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on to confirm that the service reminder has been reset. If done correctly, the service indicator should no longer be displayed.
To reset the service indicator message on a 2006 Mercedes Benz SLK 280 after completing Service A or B, insert the key into the ignition and turn it to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. When you start the engine again, the service indicator should be reset. If the message persists, repeat the process.
To reset the Mercedes SLK 280, you can typically start by turning the ignition key to position "1" (without starting the engine). Then, press the gas pedal three times within five seconds. Finally, turn the ignition off and then back on to complete the reset. For more specific resets, such as the service light, you may need to refer to the owner's manual for detailed instructions.
9 quarts
8.5 US qts
You don't mention a vehicle year but the related link contains a PDF version of 2007 SLK 280 Mercedes Benz.
The Mercedes-Benz SLK 280 has a top speed of approximately 155 mph (250 km/h), which is electronically limited. This compact roadster is equipped with a 3.0-liter V6 engine, providing a balance of performance and luxury. Its design and engineering deliver a sporty driving experience, making it a popular choice among convertible enthusiasts.
To set the clock in a Mercedes 280 SLK, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the dashboard, then use the navigation or control buttons to find the clock settings. Adjust the hours and minutes using the appropriate buttons, and confirm your changes. Finally, exit the menu to save the settings.
The SLK-280 averages about 20 city, 25 highway.
To reset the maintenance warning on a 2006 Mercedes-Benz SLK 280, turn the ignition key to position two without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. When you restart the car, the maintenance warning light should be reset. If the warning persists, repeat the process.
To reset the maintenance reminder on a 2007 Mercedes SLK 280, turn the ignition key to position 1 (do not start the engine). Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to confirm that the maintenance reminder light has been reset. If the light does not turn off, repeat the process.