You will need to scroll to the oil life display on your monitor. When you are on the oil life display hold in your scroll button until the oil life goes to 100 percent.
You do not have to reset the computer after this repair. If the Check Engine Light is on it is not because you made this repair. If you disconnected the battery the computer will reset itself.
Assuming you want to clear/reset the check engine light, if you have successfully made repairs to correct what was the cause of the check engine light to go on the light will clear itself after a few drive cycles.
Yes it will reset after a set amount of driving cycles if that repaired the problem. Or you can remove the negative battery cable for 5 minutes to reset the light.
You can reset the check engine light, on your 1998 Land Rover, by repairing what ever is causing the light to stay on. You can determine the cause by using a diagnostic tester.
reset service engine light
A reset Engine Service Light comes on when an issue comes up with in the engine. This light can be reset by a tech or by fixing the problem.
The check engine light has nothing to do with changing the oil. To turn off the light, clear the PCM code using a code reader or scan tool.
After changing the engine oil, the system must be reset. With the ignition key to ON (engine not running), push the RESET button located in the driver's side instrument panel fuse block. The CHANGE OIL light will start to flash, press and hold the RESET button again. The reset is complete when you hear the chimes and the CHANGE OIL light goes out.
What engine light. If you are referring to the Check Engine light then reset it with an OBD2 scan tool after the problem is repaired.
how do you reset engine light on 1991 volvo 240
How do you reset engine light on jeep liberty diesel
how do you reset check engine light in 2008 buick lucerne