answersLogoWhite

0

If you mean the bulb failure light; The bulb failure detector compares the current drawn by the left bulb to the right bulb and lights the bulb failure light if the currents are not equal. I have never seen a bad one. The usual reason the light is still lit after the bad bulb is changed is because the new bulb is not an exact match or the contacts are corroded. Try two new bulbs. Good Luck

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How stop an engine in Microsoft Flight Simulator X?

If you look around the cockpit should be a switch or key labeled "Magneto Switch", turn that to off to stop the engine.


Why do the engine warning lights come on when the car is off?

By "OFF," I have to assume that your question means that the ignition switch is "ON", but the engine is not running. IF that is what your question means, then the reason the engine warning lights turning on is that the manufacturer designed the system that way to show you that those warning circuits and lights are working, and ready to warn you after you start the engine, should there be a failure in one of the systems they represent.


To switch off the service engine warning light?

unplug your car battery


Warning light switch is not working find part?

Take it to a mechanic and see if they know what is wrong.


Why is your headlight warning buzzer not working when you open your door on ford streetka?

The door switch for the interior lights is faulty.


Where is the thermo fan switch located on a 2001 VW Jetta?

If it is anything like the 2000, then as you look at the engine from the front, it is on the right side of the engine near the top. There is no other switch above it and it is a simple clip that slides to the side and allows the switch to be pulled out. I changed mine and the gauge in the cockpit worked and the fans came on. Good luck.


What does the oil pressure switch do?

After starting the engine, the oil pressure rises. The switch changes from either open or closed at a predetermined oil pressure, switching off the warning light. If oil pressure drops during operation, this light should come on, warning you of this dangerous situation for the engine (and your wallet).


Why do the blinkers on my 2000 alero stop working with my hazards?

The turn signals are controlled through the hazard warning switch. I have an 01 Alero and had the same problem. I had to replace the hazard warning switch. The dealer wanted like $90 for the switch, or you can try a salvage yard, which I did and payed $10. Hope this hepls.


Can you have cockpit vision in blazing angels 2?

Yes, in Blazing Angels 2: Secret Missions of WWII, you can switch to cockpit view while flying planes to have a more immersive experience. This view allows you to see the game from the perspective of the pilot inside the cockpit.


Where is the switch that you are suposed to turn off before working on a camry's engine?

There is no such switcher. Disconnect the negative cable from your battery.


What wrong with only third stop light works meanwhile hazard flusher and tail lights are working fine and when engine running third stop light always on and ABS warning flashing on Pontiac grand am 93?

never mind, i fixed it. it was just a bad hazard switch.


On a 2002 Nissan Pathfinder dashboard warning that car door is open won't go off and because the warning light is on the doors won't lock when the engine is running what now?

replace the door switch. its most likely bad